管家婆资料大全,管家婆一句话赢大钱,管家婆资料免费公开

Welcome to Anhui Tianda!Today is: Bookmark| Home| mail login in| sitemap| ENGLISH| CHINESE

current location: Home > FFS film >
Product cate
Project Introduction

FFS film Description:

FFS films (also called heavy duty bags), are made of virgin PE (HDPE,LDPE,LLDPE)and high quality additives with 3-lay coextrusion blown film, 6-color high speed printing and computer controlled sealing bottom. Forming, filling and sealing are carried out on one automatic packaging machine. Which are mainly used in the packaging of pretrochemical granular and other prowdery solid products.
Due to its easy recycling,conformation to the international general fouth environmental protection packaging material requirements and other unique advantages of automatic packaging, storge,shipping,moisture-proof,good appearance,ect, it has become a popular packaging soluction in Europe and other delevoped countries. It is also becoming a tried-and-tested alternatvie packaging soluction to domestic petrochemical industry and gradully replacing the tradditional plastic woven bags. As expected, it will be the main products in the heavy duty packaging industry.
Anti-skid heavy duty bag is made through special process embossing treatment forming two prominent slippery band and result in an effective anti-skip effect. Meanwhile, it appears very well through heat sealing and punching at the four corners during the storage of stacking.

Product Features:

1.It meets the requirements of high strength, high temperature-resistance, anit-dropping, anti-crocking,ect with three-lay coextrusion and unique material ratio during the high speed filling, transmission and stacking.
2.Anti-ultraviolet, color stability ,no deformation at high temperature, no crack at low temperature, it can save the storage space and entend the shelf life more than one time compared with woven bag.
3.sealing, moisture resistance, superior water-proof and antifouling performance, can open piled up, easy to transport and storage, inner product does not melt or agglomeration, won’t break quantity or quality loss;
4.it is fully suitable for high-speed packaging machine and can reach more than 1,800 bags per hour. the efficiency of packaging improves 3-5 times and save about 75% labor cost compared with traditional packaging
5.with the application of new materials, the film thickness gradually reduces, the strength gradually increases, the overall cost of packaging is better than the traditional packaging % or so
6.the application of new raw materials (LLDPE, LDPE, HDPE, etc.) and quality additives to ensure reliable film quality . packing bag easily recycled and processing, protect the ecological
7.to solve the problem of warehousing, higher stacking, storage space savings, but also lower than the traditional woven bag packaging costs;

According to the demands, we imported 2 world’s most advanced three-layer coextrusion film blown production lines from Costruzioni Meccaniche Luigi Bandera S.P.A ,Italy in 2013 and 2 worlds most advanced three-layer coextrusion film blown production lines from Reifenhauser Blown Film GmbH,Germany in 2016. Two sets of integrated machines with side gusset making, embossing,flexo pringting and one set of bag making machine. The annual output reached the 10000 tons as of the end of 2016. Our planned annual production capacity will reach increase yearly. At the same time, we introduced the advanced testing and inspection equipments such as friction coefficient, falling dart tester,rally tester,high & low temperaturer tester,melt index detector,heat sealing apparatus and other testing devices. Good products are from high quality raw materials and skilled production process. So, we also pay high attention to the top brand raw materials. "To supply customers with first-class products and first-class service" is our company's quality policy, we strictly implement the ISO9001: 2008 quality management standard, ISO14001: 2004 environmental management standard and obtained OHSAS18001: 2007 occupational health and safety system certification, BRC quality system certification, Sedex certified members. Our company strictly implement the ISO9001: 2008 quality management standard as a long-term strategic decision, adhere to management innovation, "6S" management, full participation, and strengthen internal management. Focus on the shaping of modern enterprise image and the accumulation of intangible assets, promote the spirit of teamwork, advocate the "customer first, survival on quality, innovation and development", take any opportunity to expand domestic and foreign markets and strive for the top brand.

Partner

Montana coal

Inner Mongolia Mengda New Energy and Chemical Co., Ltd. (CMMD) is the second-tier enterprise under the China Coal Group and is responsible for the management of 600,000 tons of methanol project invested and constructed by China Coal Group in Erdos region. Annual production of 600,000 tons of olefin project. With an annual output of 600,000 tons of olefin project in the Ordos Group in the investment and construction of key projects, but also industrial development in the Ordos demonstration project. Plant covers an area of 197 hectares, the estimated total investment of 10.636 billion yuan. The project uses the international advanced DMTO technology, extending the development of downstream products of methanol, the main products are 300,000 tons / year of polyethylene, 300,000 tons / year of polypropylene and C4, MTBE and so on.

Yangtze River Petrochemical

Zhangjiagang Yangtze River Petrochemical Co., Ltd., Jiangsu Feixiang Chemical Co., Ltd., Jiangsu Huachang Chemical Co., Ltd. and Donghua Energy Co., Ltd. and other three units jointly funded the establishment of enterprises. Of which: Tung Wah Group of Energy invested 56%, Flying Chemical and Huachang Chemical 22% of the capital. The establishment of three joint ventures Yangtze River Petrochemical, is conducive to give full play to their advantages, the formation of good synergies. Yangtze River Petrochemical is located in Zhangjiagang, Jiangsu Yangtze River International Chemical Industrial Park, close to the company Zhangjiagang reservoir area, the registered capital of 1 billion yuan. Yangzi Petrochemical's main investment target for the 60 × 2 million tons / year propane dehydrogenation project, and a 400,000 tons / year of polypropylene project.

Total Petrochemicals

Total Petrochemical (Ningbo) Co., Ltd. Is a wholly owned subsidiary of Total Group. It is a new - generation FlNA bulk polymerization process with an international advanced level. The annual output is 200,000 tons of polystyrene (HlPS). Total is one of the world's largest integrated oil and gas companies with a refining and petrochemical business, including specialty chemicals, refining and petrochemicals, and a global workforce of 50,000, with 13 refineries, 21 petrochemical production bases and over 150 specialty chemical and fertilizer bases.

Luxi Chemical Industry

Luxi Group was established in 1992, is the original Luxi Fertilizer Plant (1976 construction) on the basis of the progressive development of the state-owned holding enterprise groups, in May 1998 initiated the establishment of Luxi Chemical Group Co., Ltd. in Shenzhen Stock Exchange Listed. Group currently total assets of 25.8 billion yuan, more than 13,000 employees.
Customer Testimonials

Montana coal

We are a subsidiary of the central enterprise of China Coal Group, which is responsible for managing 600,000 tons of methanol project and 600,000 tons of olefin project invested and constructed by China Coal Group in Erdos area. Our cooperation with the big day from the tender, was also a large number of days of the cooperation of the unit had some visits, since the cooperation, the big products in use did not appear before we have suppliers M side Not open phenomenon, M edge rupture phenomenon, sealing temperature fluctuations and so on. Days at low prices, stable quality, on-time delivery, good service really won our confidence and affirmation, let us feel that is really a big business to the heart of the big companies!

Tung Wah Group of Energy

Our cooperation with the big day from other companies recommended in the supply for more than 10 years, based on the day never had a serious quality accident, but also for us to solve some problems, in August last year , Then there have been bad sealing packaging, when we agreed here is the packaging of product quality problems, and then we informed the big companies, the morning of notice, the company's technical staff at the big day to the scene, after the scene view Finally found that the packaging machine temperature control system damage, the system shows the temperature with the actual temperature is not the same as sealing the bad phenomenon, after this one thing, let us really feel that the big is a technology-based, and To have a good after-sales service to win our confidence and affirmation, let us feel that is a big intention to run a large company!

Total Petrochemicals

Total Petrochemicals is one of the world's largest oil and gas integration companies, the requirements of suppliers is very strict, FFS film requirements are very thin, but also to ensure that 6m wrestling package is not broken. The technical requirements are higher than industry standards. [Due to the introduction of the international advanced Italian Bondra blown film (12 wire-23 wire) by Anhui Tianda, the printing production line, advanced testing equipment, professional technicians and perfect after-sale service system can meet the high quality requirements. After a number of tests and screening, we finally chose Anhui Tianda. ]

Luxi Chemical Industry

Contact Anhui Tianda from their packaging products in the industry a good reputation; February 20, 2014, we urgently need new products FFS film 10 tons test machine; we found the Anhui Environmental Protection New Material Co., Ltd.-day sales Director of Lv Zhengbao, to negotiate the procurement of FFS re-packaging film; FFS products because we are the first contact, the technical situation do not understand, Anhui Tianda arrange production, technology and sales together to communicate with us face to face, we are very satisfied! More importantly, because of our procurement application approval time delay, leading to the procurement cycle to arrive within 3 days, Anhui days of night driving system and delivered to our company on time, our various departments have put up a thumb! Laid the foundation for our long-term cooperation!
Related equipment
  • Six - color printing presses
  • FFS blown film machine
  • FFS blown film machine
  • Heat sealing device
  • Coefficient of friction
  • Falling instrument
  • Tensile testing instrument
  • Electronic analyzers
  • Electronic analytical balance
  • Electronic scales
  • Whiteness meter
Customization process
Customer consultation
Why is there a difference in the hardness of FFS membrane?
Plastic film products will change with changes in temperature, soft in summer and hard in winter; but its quality will not change.
What standards can FFS antistatic films meet
By adjusting the formula of the FFS membrane, our company currently makes the membrane surface resistivity reach 10 to 10 ohms.
How fast is the packaging speed of FFS heavy packaging film?
According to the current domestic packaging situation of polypropylene / polyethylene packaging equipment, it is normally between 1600-2000 bales / hour. We choose to calculate based on 1800 bales / hour, which means that the packaging speed of one equipment is 45 tons / hour.
Our company has just changed to FFS film packaging, may I ask your company to come to our company for on-site guidance
Yes, our company has professional FFS technicians, who are familiar with the performance of FFS film products and the use of FFS packaging equipment. If customers need it, our company can arrange technical staff to assist at any time.
Why does the FFS membrane become soft as the temperature warms?
Because the high temperature in summer leads to high temperature of the film roll, the film roll will be slightly softer than normal temperature. In this case, our company will adjust the raw material formula according to different temperatures and different regions to meet customer requirements.
During the use of FFS film, there are occasionally 1-2 bags with insufficient printing? What is the reason?
This situation often occurs when the machine is stopped and changed or the stoppage time is longer. The ink on the printed anilox tube is dried due to the stoppage. If this is necessary for your company, we can mark the problem. The company can empty the bag when using it.
What are the temperature characteristics of FFS film (bag)?
It is heat-resistant and cold-resistant. It does not soften and deform in case of high temperature, and meets the requirements of 80 C high-temperature filling. It does not break and break in severe cold.
Is the production requirements of FFS film(bag)strict?
The heavy packaging forms in the domestic industrial field are mainly film covered woven bags, kraft plastic composite bags, kraft bags and FFS heavy duty films. The former three traditional forms can not meet the requirements of modern packaging due to their inherent limitations, so the application scope will be smaller and smaller. FFS heavy duty film will replace the traditional packaging and become the mainstream of heavy packaging field. Our companys FFS heavy-duty film is made of special p
After the FFS film is packed in stock, how to solve the problem of adsorbing dust on the bag surface in the warehouse?
Allows FFS film manufacturers to add antistatic agents to their products to improve the adsorption of dust on the bag surface
We use pp color film woven bag for packaging chemical fertilizer in our company. Can your company's FFS film be used for packaging fertilizer?
Heavy duty packing film can be used for packing fertilizer and other chemical products.
There is a sudden reversal phenomenon when using FFL film packaging. What is going on?
First confirm whether it is the problem of FFS film. You can easily find the difference between the previous film rolls. If there is no difference from the previous film rolls, consider whether the raw material grade you switch contains slip agents. If In some cases, the manufacturer of the FFS film needs to adjust its raw material formula to increase the coefficient of friction on the surface of the bag;
Which industries can FFS film (bag) be applied?
Heavy packaging bags can be applied to the packaging of fertilizers and other chemical products. In addition, the promulgation and implementation of the National Food Safety Law will also promote the further optimization of food packaging. Specific examples include resins, industrial chemicals, compound fertilizers, specialty chemicals, cement, concrete, sand, mortar, lime, mortar, rice, sugar, flour, corn and other grains, as well as animal feed and agricultural seed production industries.
What are the characteristics of FFS film (bag) compared with traditional packaging bag?
Compared with the traditional packaging bag, the characteristics of FFS film (bag) mainly embody the following four points: 1. The formula of FFS film is special, which does not soften and deform in case of high temperature, and does not break in case of severe cold; 2. It is UV resistant and stable in color; 3. Compared with plastic woven bag, it can make the storage and shelf life of external packaging and internal products double; 4. Excellent sealing, moisture resistance, waterproof and anti
How many colors can your FFS heavy-film bag be printed?
Four colors can be printed on the front and two colors can be printed on the back, which can help you design and optimize the layout, and the printing effect is beautiful.
How high temperature can FFS film withstand?
At present, by adjusting the formula, our FFS film can pack up materials with 90-110 degree.
What are the advantages of your FFS film?
Efficient and convenient loading, automatic continuous integrated packaging, convenient opening; safe storage and transportation; sealed, moisture-proof, waterproof, anti-fouling, can be stored in the open air; excellent high and low temperature resistance, prolong product storage and transportation time; puncture resistance, resistance to throwing Does not break the package; packaging stability is high.
Can your FFS film be better than the industry standard in the drop test?
Yes, we can adjust the formula according to the different requirements of each manufacturer. It can easily pass about 4 meters in the drop test, which is far better than the industry standard;
How many FFS heavy production lines do you have?
We currently have six imported three-layer co extrusion blown film production lines, with an annual production capacity of over 15000 tons. It is estimated that from the middle of 2020 to the end of 2020, we will introduce four imported three-layer co extrusion blown film production lines again, with an annual production capacity of over 25000 tons.
How can you guarantee the timeliness and stability of logistics when shipping to remote areas?
At present, our company has signed three logistics companies to supplement each other, and signed relevant service agreements for the guarantee of time and goods quality, so as to ensure the timeliness of delivery time and the integrity of product quality.
What are the advantages of your FFS film compared with traditional packaging?
Efficient and convenient loading, automatic and continuous packaging, convenient opening; safe storage and transportation; sealed, moisture-proof, waterproof, anti pollution, can be stored in the open air; excellent high and low temperature resistance, extended product time of storage and transportation; puncture resistance, anti throwing; high stability in packaging and stacking.
Is the strength of your FFS film superior to the industry standard?
Yes, we can adjust the formula according to the different requirements of each manufacturer, which is far superior to the industry standard;
What are your company’s FFS film mainly used for packaging?
At present, our companys FFS heavy packing is mainly concentrated in the petrochemical industry, and the packing contents are mainly resin particles and powdery chemical raw materials. There is a small amount of involvement in fertilizer and food industries.
Your company can produce PE packaging bags. Can you produce pallet mat film?
Yes. Please leave your contact information. Our company will arrange technicians to communicate with you.
Q: How can FFS film (bag) avoid the dust left at the mouth of the bag when packing powdery materials?
A: At present, this situation has been solved in the filling equipment. As long as the vacuum pumping device is added to the equipment, it can improve the occurrence of this situation.
What is the packaging speed of the FFS film applied on the automatic packaging machine?
At present, the speed of domestic automatic packaging machines is normally between 1600 and 2,200 bags/hour, and the conversion speed is 40-55 tons/hour.
Is the FFS film currently used in the market for pp materials or larger density raw materials?
At present, FFS films are already mature packaging, and powder materials are widely used in paste resin powders, which are widely used for salt packaging.
Can the FFS film be able to withstand high temperatures of about 100 degrees when packaged?
In principle, it is possible to achieve high temperature resistance by using high temperature resistant raw materials. Since there is no practical application in this aspect, it is necessary to carry out this test before the final conclusion can be made.
What is the film surface resistance of the FFS film that can satisfy the friction of the film surface without generating static electricity?
If the film surface friction is not to generate static electricity, the film surface resistivity should be at least 10 9 ohms;
What is the diameter of the cold stretch film of your company?
The normal diameter can be 95-100cm.
Why does the FFS film also have a crack in the mouth after sealing?
In this case, the temperature difference of the heating strip at the sealing part is generally fluctuated, and the heating strip is not replaced by the long-term replacement, resulting in no heat sealing of the mouth when sealing. This situation generally occurs as the fluctuation of the heating strip is reduced, or it can be normal with the heating strip.
How to solve the problem that the FFS (film) bag has gas in the bag after packaging?
At present, our company has the following methods in dealing with the FFS film (bag) packaged by the customer: 1. For the packaging material, it can not be in contact with the air, and can be vacuumed on the packaging machine; It is a fermentation product that can add a single exhaust valve to the package; 3. Exhaust in the form of micropores (small aperture); 4. Exhaust in the form of pinholes (slightly larger aperture).
What is the production scale of your current FFS film?
At present, our company has 6 FFS membrane imported blown film production lines with an annual supply capacity of 15,000 tons. In addition, our production capacity will increase to 20,000 tons/year by the end of the year.
Why does the FFS film become soft in the summer?
Because the high temperature in summer makes the film roll high temperature will cause the film roll to be slightly softer than normal temperature. If we need to improve this situation, we can adjust the raw material formula according to different temperature and different regions to meet the customers requirements.
Why does the FFS film stick to the roots?
In this case, there is generally a high temperature in summer, the ambient temperature is high, and the film roll becomes soft, and the tension of winding near the root in the production winding process is greater. To improve the situation, it is necessary to change according to the temperature. Adjusting the formulation of the film roll can be improved;
Can the FFS film make the film surfaces rub against each other without generating static electricity?
It can be done, but everything is mutual. We can reduce the resistivity of the film surface by adding antistatic agent, so that the film surface friction does not generate static electricity. However, at the same time, as the antistatic dose increases, the friction coefficient of the film roll is drastically reduced. And this is the need to weigh the customer side.
How does FFS film packaging reduce dust absorption during use and storage?
We will add an antistatic agent to the film roll formulation during production to reduce the surface resistance of the film, thereby reducing the dust adsorption during packaging and storage.
What is the shelf life of the materials in the FFS film (bag) compared to the traditional packaging?
The formula of the packaging bag is special, it does not soften and deform when it is high temperature, it is not brittle and rupture in case of severe cold; it is UV-resistant and stable in color; compared with woven bags, it can double the storage and shelf life of outer packaging and internal products.
Is the FFS film (bag) packaging capacity flexible?
The packaging capacity is very flexible, and can be designed and manufactured according to the different requirements of different merchants for color, thickness and specifications, and can be adapted to the needs of different manufacturers and different regions.
What are the advantages of FFS film (bag) in printing?
FFS film (bag) printing according to customers layout requirements, by adjusting the film through the film path, double-sided corona and multi-color printing. The printing line is generally equipped with embossing and folding device. The printed pattern of the product is clear and complete, the embossing force is suitable, and the side of the hem and the winding side are neat. The FFS heavy packaging film is based on the semi-finished film produced by the blown film line. The product is pre-for
Can your FFS film (bag) be customized?
It is perfectly possible that the FFS film (bag) has a flexible packaging capacity and can be designed and manufactured according to the different requirements of different merchants for color, thickness and specifications, and can be adapted to the needs of different manufacturers and different regions.
How is the FFS film (bag) print compared with traditional packaging?
The surface of the FFS film (bag) is flat, smooth and beautiful. The printed pattern is rich in content, clear in color, and anti-counterfeiting. It is superior to the traditional packaging in all cases;
What is the difference between FFS bags with M hem and without M hem?
Because of the need of tray palletizing, the sides of the bag body are folded and processed, and the cross-section is shaped like M, which is good for palletizing; The sealing property without the M hem sealing is better than the M hem;
What is the sealing performance of the FFS film?
What is the production equipment and process of FFS film?
(Because the heavy packaging film not only needs strength assurance, but also takes into account the requirements of packaging, heat sealing, palletizing, transportation and other links, so the performance index is more complex, and it is difficult to meet the requirements by single-layer extrusion. The three-layer co-extrusion method can be used to decompose the quality indicators layer by layer, and meet the different quality indicators of customers through different film layers, so as to mee
What are the advantages of FFS heavy duty packaging film over traditional packaging?
The packaging automation is high, and the efficiency is 3-5 times higher than the traditional packaging; Excellent sealing, moisture, water and anti-fouling performance, can be stacked in the open air; Meet the filling requirements of high temperature materials below 80 C; Excellent puncture resistance and drop resistance, effectively avoiding breakage; High palletizing stability for easy transportation and storage; In case of high temperature, it does not soften and deform, and it is not brittl
What is the FFS heavy duty packaging film?
FFS heavy packaging film is an automatic forming potting bag: film (Film); filling (Fil1); sealing (Sea1) integration abbreviation, is the film online automatic forming - filling bag. It is different from the ordinary pre-made bag, after filling the contents, and then sealing the packaging method. There are two modes (vertical automatic filling and sealing) and (horizontal automatic filling and sealing).
Can the FFS film (bag) pack 40kg material?
Yes, the thickness of the film can be adjusted according to the variety and weight of the packaged material. The thickness of the normal 25kg film is 16 filaments, and the thickness of the film is 40 filaments or more.
What is the current production capacity of your FFS heavy packaging film?
At present, our company produces more than 15,000 tons of FFS film per year.
I would like to ask the M-fold FFS bag after the installation of the exhaust valve, the sealing effect is not good, how is it?
The purpose of installing the exhaust valve of the FFS bag is to single-exhaust, that is, the bag needs to be sealed after sealing, and the M-fold FFS bag is heat-sealed with 4 layers and 2 layers at the M-to-center connection. In this position, it is easy to cause unsealing; therefore, if an FFS bag is used to install the exhaust valve, it is recommended to use a one-shaped bag, not to use M-folded;
What is the price of the FFS film compared to the traditional packaging bag?
If the light is considered from the price, the price of the FFS film is only slightly higher than the traditional packaging. If the overall appearance, quality, packaging speed, labor cost, etc., the cost of the FFS film will be much better than the traditional packaging;
Can you provide a third-party test report on plasticizer for FFS film?
Yes, it can be provided.
I would like to ask if the FFS film printing has faded, what is the cause?
There is a major relationship between printing color and ink and film surface corona.
Does the elongation at break of the FFS film need to be increased by the extension machine when it is tested by a tensile tester?
It is not suitable to add an extension machine to detect items with relatively high elongation such as plastic film.
I would like to ask that our company use only a few thousand bags a month. I want to use FFS bag packaging. Does your company know about sealing equipment?
If the amount is not large, you can use a separate sealing device, such a device is around 6000 yuan! If you are interested, please contact me 18297599949 Liu
How do FFS membranes (bags) avoid dents during finger handling?
Because the FFS film bag is a plastic product, it is afraid of hooks and fears sharpness; it is suitable for the presence of dents in the fingers during handling; 1. The thickness of the FFS film (bag) can be increased to avoid, 2. Workers need to be involved in the loading process. Emphasize that you cant avoid it with your fingers.
What is the advantage of FFS heavy film packaging compared to traditional packaging?
FFS heavy packaging film has great advantages in labor cost and environmental protection, which is reflected in the advantages of fast packaging speed, one molding, no pollution, material saving, recyclability, low labor cost, good sealing moisture resistance and printing performance. status
If the FFS bag is equipped with an exhaust valve, where is the best position on the bag surface?
Without affecting the sealing, the position of the exhaust valve is about 15 cm from the mouth, and the lateral position can be on both sides or in the middle of the bag. The adjustment can be made according to the actual situation.
FFS film (bag) has gas in the bag after packaging, how to solve the problem?
At present, FFS membranes (bags) are available in four ways: 1. For packaging materials, they should not be in contact with air, and vacuum treatment can be done on the packaging machine; 2. For the content is a fermentation product, a single exhaust valve can be added to the packaging bag; 3. Exhaust gas in the form of micropores (small pore size); 4. Exhaust in the form of pinholes (slightly larger aperture).
Why does the FFS film appear to be dropped when it is packaged?
There are several factors, because it is the cursor detection, the color of the film is too transparent, which will cause the cursor to be easily detected, and the bag is soft, and the air pressure on the packaging machine is unstable. The aging of the suction cup will also cause this situation, specifically According to the situation on the spot.
Our company has changed its valve pocket to FFS single bag. Can the original sealing equipment continue to be used?
The sealing device does not need to be replaced. It only needs to be heated with the heating zone of the partition. The MFS of the FFS bag is 4 layers, and the middle is two layers. The temperature on both sides is higher than the middle temperature.
What is the reason of the printing fade on the FFS film?
There are two cases. 1 The outer packaging should not be exposed to acid or alkaline substances, or stored in the air containing acid and alkali substances. 2. If the first case is excluded, it is a problem of the printer or the ink.
How is the FFS heavy duty film sealing?
FFS heavy duty packaging film is excellent in sealing, moisture resistance, water resistance and antifouling performance. It can be stacked in the open air for transportation and storage. The inner product does not melt, does not agglomerate, does not lose weight, and the quality is not lost.
I would like to ask my packaged products can not be in contact with the outside air, how to solve the problem of gas change after packaging with FFS bag?
There are two ways. 1. If the product is similar to the type of fermented feed, the product will be continuously fermented to produce gas after packaging. This situation can be solved by adding a single exhaust valve. 2. If the product is packaged, it will not be fermented. It cant be in contact with the outside air, so it can only be vacuumed when it is loaded by the packaging equipment.
Can you add a QR code to your FFS film bag?
Yes,Of course
Is the unit price of your FFS film is settled in tons or tons?
Our film is settled at the tonnage price. If it is a single bag of FFS, it will be settled by piece.
What is the temperature resistance of your FFS film printing ink?
not exceeds 120 degree
Is it difficult to open the FFS film when you use up to the core root?
Our company will adopt a unique formula for the characteristics of raw materials used in FFS membranes to avoid the phenomenon that the root of the membrane can not be opened.
When FFS heavy packaging film (bag) is used for packaging powder materials, does it affect the sealing effect?
You can add a blowing gas before the sealing on the packaging machine equipment, which can completely prevent the powder material from sticking to the sealing part and affect the heat sealing effect.
Can your company produce colorful FFS film bags?
Yes. It can be produced.
Can you provide a third-party authority inspection report for FFS film?
Yes,we can
Can your FFS film be used for fertilizer packaging?
Yes. of course
Can you produce sheet FFS film and cold stretch film?
We can produce as customers request.
What’s the size of ID of the FFS film core in your company
The internal diameter of our film roll core is 150mm
What’s the max FFS film thickness for your equirment?
Our company imported blown film line, and the thickness range can be about 120 to 240 micron
How does this three-layer co-extrusion blown film machine maintain the stability of each layer of raw materials?
The three-layer co-extrusion blown film machine equipment adopts an automatic weighing and batching system, which effectively ensures the accuracy of the formula and the stability of the product quality.
What are the advantages of FFS heavy-duty film in printing compared with ordinary woven bags?
The FFS film is full-color in print, clear in writing, does not fade, and is environmentally friendly.
What’s the role of side gusset with FFS heavy duty film(bag)?
Side gusset will make the pallets more beautiful, the palletizing height will be higher, and the warehouse space will be saved.
Will your FFS membrane bag be designed for labyrinth exhaust angle seals?
It can be designed as a triangular or curved exhaust corner seal.
If you use FFS anti-skid heavy-duty film for packaging, what is the maximum stacking height?
You can stack 8-10 layers without M-folding and 12-15 layers with M-folding.
How many kilograms of FFS heavy bags can your company currently produce?
According to different loading quality, our company can produce 10-50kg different types of bags to meet the needs of customers.
We need to pack 1,000 tons of solid particles. Consider packaging with FFS membrane. If it is a roll film, how many tons is needed?
One ton of roll film can produce more than 7000 single bags, only 6 tons is enough for packaging.
re:Can your company's FFS membranes hit the micro-holes in the folds?
Q: Can your companys FFS membranes hit the micro-holes in the folds? A: The location of punch holes can be controlled according to customer requirements.
Your company FFS film finished winding diameter of up to more than centimeter?
A: Our FFS film is currently the largest winding diameter 150 cm.
re: FFS questions?
Q: What is your main raw material for FFS film production? A: The main metallocene, LLDPE, LDPE
re:question: Your company FFS film printing layout in the automatic packaging machine can cut any guarantee can always have a complete page in the bag?
question: Your company FFS film printing layout in the automatic packaging machine can cut any guarantee can always have a complete page in the bag? A: You can design cycle layout printing, can always ensure that there is a complete layout.
re:What is the role of metallocene in your FFS membrane formula?
What is the role of metallocene in your FFS membrane formula? A: It can enhance the toughness and tensile strength of the film, enhance the intensity of falling, so that the film can increase the anti-aging ability
Can your company make a FFS maze maze bag?
Answer: Yes
What is the range of width and thickness of your FFS film?
Hello! Our FFS film width range: 420-650mm, thickness range: 120-250 micron
May I know, FFS equipments import from which country ?
Italy and Germany
re:can we use FFS bags ?
Our company want to use FFS packaging bags ,how about the price of this kind of bags ? The price of this type bag is about RMB 2/PC, the confirmed price is based on the detailed specification, if you expect to cooperate, we want to serve for you.
Can you produce the microporous FFS film? Does it affect the strength if hit micro hole?
Yes,we can. Our equipment is equipped with the advanced micro hole-making device. No any influence on strength. Bag is not broken when dropping test.
What’s the thickness scope of FFS film?
Thickness scope: 120-230 mircon.
How many colors printing are workable at maximum?
Four different colors on front side and two different colors on back side. Moreover, we can help optimize the design for more beautiful printing.
Do you produce food grade FFS film?
We not only obtained the production license for Chemical product but also for food stuff. In full compliance with the state environmental requirements on food stuff.
Inspection Report
FFS食品级包装袋第三方检验报告
Production Process
FFS膜生产工艺
Industry Standard
XML 地图 | Sitemap 地图